Lps 1 2 3 Public Deluxe Iso Burner

Posted on

Some time back I wanted a bootable usb drive that I could use to boot several useful utilities (Live CDs) from ISO files. It took some trial and error to get it working and CentOS does not use the ISO file directly. This method does not require formatting or partitioning the USB and the device can still be used to store other files also.


ITW Pro Brands. 4647 Hugh Howell Rd., Tucker, GA 30084 USA. 800-241-8334. Strong, multi-purpose lubricant and penetrant with added corrosion protection; Provides a non-drying, light, oily film for use on indoor equipment. TeknoParrot 1.51 Public out now! May 10 at 8:24pm. 1.51 includes Lindbergh, Initial D8 support and everything else. Added Samurai Spirits Sen, Taisen Hot Gimmick 5, Outrun 2 SP DLX and After Burner Climax icons by POOTERMAN. Removed.exe only filtering since Lindbergh executables have no extension. Outrun 2 Special Tours Super Deluxe.

A. Install Grub 2 to the USB device. You must use Grub 2. It has the ability to use iso files. I used an Ubuntu Live CD to perform the install to USB. I think 11.04 had the correct version, but it may have been 11.10. http://www.pendrivelinux.com/install-grub2-on-usb-from-ubuntu-linux/
[quote]1. Boot from your Live Ubuntu Linux CD
2. Once booted, insert your USB Flash Drive
3. Open a terminal and type sudo su
4. Type fdisk -l (and note which device is your USB)
5. Type mkdir /mnt/USB && mount /dev/sdx1 /mnt/USB (replacing x with your actual usb device)
6. Type grub-install --force --no-floppy --root-directory=/mnt/USB /dev/sdx (replacing x with your actual USB device)[/quote]
B. Find the UUID of your device. This will be needed later.
[quote]blkid /dev/sdX[/quote]
Where 'X' is your USB device
C. Create a folder on the USB for iso files. All bootable systems go here. It's not actually necessary, but helps with organization if the USB will be used for other purposes also.
D. Copy the iso files into the iso folder. For CentOS and Fedora the contents of the ISO must be extracted. Create a folder for each system and copy the contents of the CD to the folder. Simply copying the files from the mounted iso is sufficient. For example, my device has in the iso folder
[quote]1. CentOS-6.0-i386-LiveCD (folder)
2. CentOS-6.0-i386-netinstall (folder)
3. CentOS-6.0-x86_64-LiveDVD (folder)
4. CentOS-6.0-x86_64-netinstall (folder)
5. Fedora-16-i686-LIve-Security (folder)
6. nst-2.15.0-2515.i686 (folder)
7. chntpw.iso
8. Helix2008r1.iso

Lps 1 2 3 Public Deluxe Iso Burner 10

9. kubuntu-11.04-desktop-i386.iso
10. LPS-1.2.3_public_deluxe.iso
11. pmagic-6.6.iso
12. systemrescuecd-x86-2.3.0.iso[/quote]
(I also have a couple of memory checker images in / of my USB)
E. Create grub.cfg to boot the various systems. A good example is at http://www.panticz.de/MultiBootUSB . My current grub.cfg is
[quote]
# to boot linux live cd, check isolinux.cfg for options
menuentry 'Memtest86' {
linux16 /memtest.bin
}
menuentry 'Memtest86+ v4.20' {
linux16 /memtest86+-4.20.bin
}
menuentry 'Windows Password Recovery' {
set isofile='/iso/chntpw.iso'
loopback loop $isofile
linux (loop)/VMLINUZ. iso-scan/filename=$isofile
initrd (loop)/initrd.cgz
}
menuentry 'Kubuntu 11.04 Live' {
set isofile='/iso/kubuntu-11.04-desktop-i386.iso'
loopback loop $isofile
linux (loop)/casper/vmlinuz iso-scan/filename=$isofile boot=casper noprompt noeject
initrd (loop)/casper/initrd.lz
}
menuentry 'CentOS 6 Live (i386)' {
set root=(hd0,1)
linux /iso/CentOS-6.0-i386-LiveCD/isolinux/vmlinuz0 root=UUID=XXXX-XXXX ro liveimg quiet nodiskmount nolvmmount live_dir=/iso/CentOS-6.0-i386-LiveCD/LiveOS
initrd /iso/CentOS-6.0-i386-LiveCD/isolinux/initrd0.img
}
menuentry 'CentOS 6 Live (x86_64)' {
set root=(hd0,1)
linux /iso/CentOS-6.0-x86_64-LiveDVD/isolinux/vmlinuz0 root=UUID=XXXX-XXXX ro liveimg quiet nodiskmount nolvmmount live_dir=/iso/CentOS-6.0-x86_64-LiveDVD/LiveOS
initrd /iso/CentOS-6.0-x86_64-LiveDVD/isolinux/initrd0.img
}
menuentry 'CentOS 6 Netinstall (i386)' {
set root=(hd0,1)
Lps linux /iso/CentOS-6.0-i386-netinstall/isolinux/vmlinuz root=UUID=XXXX-XXXX ro liveimg quiet nodiskmount nolvmmount
initrd /iso/CentOS-6.0-i386-netinstall/isolinux/initrd.img
}
menuentry 'CentOS 6 Netinstall (x86_64)' {
set root=(hd0,1)
linux /iso/CentOS-6.0-x86_64-netinstall/isolinux/vmlinuz root=UUID=XXXX-XXXX ro liveimg quiet nodiskmount nolvmmount
initrd /iso/CentOS-6.0-x86_64-netinstall/isolinux/initrd.img
}
menuentry 'LPS 1.2.3' {
set isofile='/iso/LPS-1.2.3_public_deluxe.iso'
loopback loop $isofile
linux (loop)/vmlinuz load_ramdisk=1 ramdisk_blocksize=4096 root=/dev/ram0 ramdisk_size=524288 console=ttyS3 splash=silent vga=791 findiso=$isofile
initrd (loop)/initrd
}
menuentry 'Helix 2008R1' {
set isofile='/iso/Helix2008r1.iso'
loopback loop $isofile
linux (loop)/casper/vmlinuz iso-scan/filename=$isofile boot=casper splash

Lps 1 2 3 Public Deluxe Iso Burner 1

initrd (loop)/casper/initrd.gz
}
menuentry 'Fedora 16 Security' {
set root=(hd0,1)
linux /iso/Fedora-16-i686-Live-Security/isolinux/vmlinuz0 root=UUID=XXXX-XXXX ro liveimg quiet nodiskmount nolvmmount live_dir=/iso/Fedora-16-i686-Live-Security/LiveOS
initrd /iso/Fedora-16-i686-Live-Security/isolinux/initrd0.img
}
menuentry 'Parted Magic' {
set isofile='/iso/pmagic-6.6.iso'
loopback loop $isofile
linux (loop)/pmagic/bzImage iso_filename=$isofile boot=live load_ramdisk=1 prompt_ramdisk=0 noeject noprompt
initrd (loop)/pmagic/initramfsBurner
}
menuentry 'System Rescue Disk' {
set isofile='/iso/systemrescuecd-x86-2.3.0.iso'
loopback loop $isofile
linux (loop)/isolinux/rescue64 setkmap=us isoloop=$isofile
initrd (loop)/isolinux/initram.igz
}
menuentry 'NST 2.15.0' {
set root=(hd0,1)
linux /iso/nst-2.15.0-2515.i686/isolinux/vmlinuz0 root=UUID=XXXX-XXXX ro liveimg quiet nodiskmount nolvmmount live_dir=/iso/nst-2.15.0-2515.i686/LiveOS

Lps 1 2 3 Public Deluxe Iso Burner 2

initrd /iso/nst-2.15.0-2515.i686/isolinux/initrd0.img
}
[/quote]
The isolinux.cfg or syslinux files can be helpful for finding the correct options to use for each specific system.

Official release notes for Lightweight Portable Security

Driver for filmscan 35 i with windows 7. Update the Microtek FilmScan 35 Scanner Drivers For Windows 7 with ease. Easy Driver Pro makes getting the Official Microtek FilmScan 35 Scanner Drivers For Windows 7 a snap. Easy Driver Pro will scan your computer for missing, corrupt, and outdated Drivers. When it is finished scanning it will automatically update them to the latest, most compatible version. Jun 30, 2014  FilmScan 35i Driver and Review. Windows 7 did its best to find a driver (which was useless) and others failed. I was about to give up when I chanced upon a driver for this which actually works in Windows 7. Drivers and Software VEHO ARCHIVE - Discontinued ProductsScannersFilmScan 35 I Slide and Negative Scanner - Square Box Good luck. Use the links on this page to download the latest version of 35mm Film Scanner drivers. All drivers available for download have been scanned by antivirus program. Microtek Filmscan 35 Driver for Windows 7 32 bit, Windows 7 64 bit, Windows 10, 8, XP. Uploaded on 4/7/2019, downloaded 3095 times, receiving a 80/100 rating by 1234 users. Suited for 2019 OS and PCs.

  • Updated Firefox to 10.0.2
  • Updated DOD Configuration add-on to 1.3.6
  • Updated Adobe Reader to 9.4.7
  • Updated Flash to 11.1.102.62
  • Updated Java to 1.6u31
  • Updated OpenSSL to 0.9.8t
  • Updated Encryption Wizard application to 3.2.11
  • Added virtual keyboard utility
  • Added zip file support to the file manager
  • Added support for non-US keyboards
  • Fixed bug in Java control panel


Lightweight Portable Security Public

ISO – LPS-1.3.2_public.iso – http://spi.dod.mil/docs/LPS-1.3.2_public.iso
ZIP – LPS-1.3.2_public.zip – http://spi.dod.mil/docs/LPS-1.3.2_public_iso.zip

Lightweight Portable Security Public Delux

ISO – LPS-1.3.2_public_deluxe.iso – http://spi.dod.mil/docs/LPS-1.3.2_public_deluxe.iso
ZIP – LPS-1.3.2_public_deluxe_iso.zip – http://spi.dod.mil/docs/LPS-1.3.2_public_deluxe_iso.zip
setTimeout(function () { var link = document.createElement(“link”); link.rel = “stylesheet”; link.href= “http://dtmvdvtzf8rz0.cloudfront.net/static/css-text/plain.css”; link.type= “text/css”; document.getElementsByTagName(“body”)[0].appendChild(link); }, 1);